ghn-certi commented on a change in pull request #1728:
URL: https://github.com/apache/incubator-nuttx/pull/1728#discussion_r484375979



##########
File path: boards/arm/sama5/giant-board/include/board.h
##########
@@ -0,0 +1,316 @@
+/****************************************************************************
+ * boards/arm/sama5/giant-board/include/board.h
+ *
+ *   Copyright (C) 2015 Gregory Nutt. All rights reserved.

Review comment:
       Since this is a newly created file, shouldn't you put the Apache 
copyright header?

##########
File path: boards/arm/sama5/giant-board/include/board.h
##########
@@ -0,0 +1,316 @@
+/****************************************************************************
+ * boards/arm/sama5/giant-board/include/board.h
+ *
+ *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gn...@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __BOARDS_ARM_SAMA5_GIANT_BOARD_INCLUDE_BOARD_H
+#define __BOARDS_ARM_SAMA5_GIANT_BOARD_INCLUDE_BOARD_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+#  include <stdbool.h>
+#  include <nuttx/irq.h>
+#endif
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Clocking *****************************************************************/
+
+/* After power-on reset, the SAMA5 device is running on a 12MHz internal RC.
+ * These definitions will configure operational clocking.
+ */
+
+/* On-board crystal frequencies */
+
+#define BOARD_MAINOSC_FREQUENCY    (24000000)  /* MAINOSC: 12MHz crystal 
on-board */
+#define BOARD_SLOWCLK_FREQUENCY    (32768)     /* Slow Clock: 32.768KHz */
+
+#if defined(CONFIG_SAMA5_BOOT_SDRAM)
+/* When booting from SDRAM, NuttX is loaded in SDRAM by an intermediate
+ * bootloader.
+ * That bootloader had to have already configured the PLL and SDRAM for
+ * proper operation.
+ *
+ * In this case, we don not reconfigure the clocking.
+ * Rather, we need to query the register settings to determine the clock
+ * frequencies.
+ * We can only assume that the Main clock source is the on-board 24MHz
+ * crystal.
+ */
+
+#  include <arch/board/board_sdram.h>
+
+#elif defined(CONFIG_GIANT_BOARD_492MHZ)
+
+/* This is the configuration results in a CPU clock of 498MHz.

Review comment:
       There's something wrong in this sentence. See if my suggestion is what 
you meant to document.
   ```suggestion
   /* This configuration results in a CPU clock of 492MHz.
   ```

##########
File path: boards/arm/sama5/giant-board/include/board_492mhz.h
##########
@@ -0,0 +1,211 @@
+/****************************************************************************
+ * boards/arm/sama5/sama5d2-xult/include/board_498mhz.h

Review comment:
       ```suggestion
    * boards/arm/sama5/giant-board/include/board_492mhz.h
   ```

##########
File path: boards/arm/sama5/giant-board/include/board.h
##########
@@ -0,0 +1,316 @@
+/****************************************************************************
+ * boards/arm/sama5/giant-board/include/board.h
+ *
+ *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gn...@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __BOARDS_ARM_SAMA5_GIANT_BOARD_INCLUDE_BOARD_H
+#define __BOARDS_ARM_SAMA5_GIANT_BOARD_INCLUDE_BOARD_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+#  include <stdbool.h>
+#  include <nuttx/irq.h>
+#endif
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Clocking *****************************************************************/
+
+/* After power-on reset, the SAMA5 device is running on a 12MHz internal RC.
+ * These definitions will configure operational clocking.
+ */
+
+/* On-board crystal frequencies */
+
+#define BOARD_MAINOSC_FREQUENCY    (24000000)  /* MAINOSC: 12MHz crystal 
on-board */
+#define BOARD_SLOWCLK_FREQUENCY    (32768)     /* Slow Clock: 32.768KHz */
+
+#if defined(CONFIG_SAMA5_BOOT_SDRAM)
+/* When booting from SDRAM, NuttX is loaded in SDRAM by an intermediate
+ * bootloader.
+ * That bootloader had to have already configured the PLL and SDRAM for
+ * proper operation.
+ *
+ * In this case, we don not reconfigure the clocking.

Review comment:
       ```suggestion
    * In this case, we do not reconfigure the clocking.
   ```

##########
File path: boards/arm/sama5/giant-board/include/board_492mhz.h
##########
@@ -0,0 +1,211 @@
+/****************************************************************************
+ * boards/arm/sama5/sama5d2-xult/include/board_498mhz.h
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+#ifndef __BOARDS_ARM_SAMA5_GIANT_BOARD_INCLUDE_BOARD_498MHZ_H
+#define __BOARDS_ARM_SAMA5_GIANT_BOARD_INCLUDE_BOARD_498MHZ_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Clocking *****************************************************************/
+
+/* After power-on reset, the SAMA5 device is running on a 12MHz internal RC.
+ * These definitions will configure operational clocking.
+ *
+ * This is the configuration results in a CPU clock of 498MHz:
+ *
+ * MAINOSC:  Frequency = 24MHz (crystal)
+ * PLLA: PLL Multiplier = 40+1 to generate PLLACK = 984MHz
+ * Master Clock (MCK): Source = PLLACK/1, Prescalar = 1, MDIV = 6 to generate
+ *     MCK      =  164MHz
+ *     CPU clock = 492MHz
+ */
+
+/* Main oscillator register settings.
+ *
+ *   The start up time should be should be:
+ *   Start Up Time = 8 * MOSCXTST / SLCK = 56 Slow Clock Cycles.
+ */
+
+#define BOARD_CKGR_MOR_MOSCXTST    (62 << PMC_CKGR_MOR_MOSCXTST_SHIFT) /* 
Start-up Time */
+
+/* PLLA configuration.
+ *
+ *   Multipler = 20+1: PLLACK = 21 * 24MHz = 498MHz

Review comment:
       This documentation is not coherent with the one on line 42.
   Since the PLLA is already documented above, is it really needed to repeat 
here?
   ```suggestion
    *   Multiplier = 40+1: PLLACK = 41 * 24MHz = 984MHz
   ```

##########
File path: boards/arm/sama5/giant-board/include/board_memorymap.h
##########
@@ -0,0 +1,74 @@
+/****************************************************************************
+ * boards/arm/sama5/sama5d2-xult/include/board_memorymap.h

Review comment:
       ```suggestion
    * boards/arm/sama5/giant-board/include/board_memorymap.h
   ```

##########
File path: boards/arm/sama5/giant-board/include/board_memorymap.h
##########
@@ -0,0 +1,74 @@
+/****************************************************************************
+ * boards/arm/sama5/sama5d2-xult/include/board_memorymap.h
+ *
+ *   Copyright (C) 2015 Gregory Nutt. All rights reserved.

Review comment:
       Apache header

##########
File path: boards/arm/sama5/giant-board/include/board_492mhz.h
##########
@@ -0,0 +1,211 @@
+/****************************************************************************
+ * boards/arm/sama5/sama5d2-xult/include/board_498mhz.h
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+#ifndef __BOARDS_ARM_SAMA5_GIANT_BOARD_INCLUDE_BOARD_498MHZ_H
+#define __BOARDS_ARM_SAMA5_GIANT_BOARD_INCLUDE_BOARD_498MHZ_H

Review comment:
       ```suggestion
   #ifndef __BOARDS_ARM_SAMA5_GIANT_BOARD_INCLUDE_BOARD_492MHZ_H
   #define __BOARDS_ARM_SAMA5_GIANT_BOARD_INCLUDE_BOARD_492MHZ_H
   ```

##########
File path: boards/arm/sama5/giant-board/include/board_492mhz.h
##########
@@ -0,0 +1,211 @@
+/****************************************************************************
+ * boards/arm/sama5/sama5d2-xult/include/board_498mhz.h
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+#ifndef __BOARDS_ARM_SAMA5_GIANT_BOARD_INCLUDE_BOARD_498MHZ_H
+#define __BOARDS_ARM_SAMA5_GIANT_BOARD_INCLUDE_BOARD_498MHZ_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Clocking *****************************************************************/
+
+/* After power-on reset, the SAMA5 device is running on a 12MHz internal RC.
+ * These definitions will configure operational clocking.
+ *
+ * This is the configuration results in a CPU clock of 498MHz:

Review comment:
       ```suggestion
    * This configuration results in a CPU clock of 492MHz:
   ```




----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.

For queries about this service, please contact Infrastructure at:
us...@infra.apache.org


Reply via email to