I should clarify: After the change, a boot would end up showing the UI momentarily (a few seconds) then the black screen.
On Sat, Jul 12, 2008 at 3:04 PM, Randy S. <[EMAIL PROTECTED]> wrote: > Lorn, since making this change, I have not been able to boot the device > successfully into Qtopia again. > > > > > On Fri, Jul 11, 2008 at 4:12 PM, Lorn Potter <[EMAIL PROTECTED]> > wrote: > >> Randy S. wrote: >> > Great! Here's what I've got. >> > 1. Often, a startup seems to fail. This always happens when I use NAND >> > u-Boot (a 7-10-2008 version), but usually is OK with u-Boot from NOR (I >> > think it's a May 2008 version). >> Try this: >> Quickfix is to ssh into device, edit /etc/init.d/qpe and remove the lines: >> -#crappy workaround for some weird suspend bug >> -rm /dev/ttySAC0 >> -mknod /dev/ttySAC0 c 204 64 -m 660 >> -chgrp dialout /dev/ttySAC0 >> - >> > > >
_______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
