Randy S. wrote: > I should clarify: After the change, a boot would end up showing the UI > momentarily (a few seconds) then the black screen.
that might be because it is suspending. If it is stil lplugged in, it still thinks its on battery as apm is borked > > > On Sat, Jul 12, 2008 at 3:04 PM, Randy S. <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > Lorn, since making this change, I have not been able to boot the > device successfully into Qtopia again. > > > > > On Fri, Jul 11, 2008 at 4:12 PM, Lorn Potter <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > Randy S. wrote: > > Great! Here's what I've got. > > 1. Often, a startup seems to fail. This always happens when I > use NAND > > u-Boot (a 7-10-2008 version), but usually is OK with u-Boot > from NOR (I > > think it's a May 2008 version). > Try this: > Quickfix is to ssh into device, edit /etc/init.d/qpe and remove > the lines: > -#crappy workaround for some weird suspend bug > -rm /dev/ttySAC0 > -mknod /dev/ttySAC0 c 204 64 -m 660 > -chgrp dialout /dev/ttySAC0 > - > > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Openmoko community mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/community -- Lorn 'ljp' Potter Software Engineer, Systems Group, Trolltech, a Nokia company _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
