Dareus wrote: > > Jim Morris wrote: >> Radek Barton( wrote: >>> 1. Download lastest gpsd source code at >>> http://download.berlios.de/gpsd/gpsd-2.37.tar.gz and unpack it somewhere. >>> 2. Add line #include <linux/limits.h> to gpsd.h-head file. >>> 3. Modify line 15 of gps.h file from <limits.h> to <linux/limits.h> >>> 4. configure with command: PATH=/opt/toolchains/arm920t-eabi/bin: >>> $PATH ./configure --host=arm-angstrom-linux-gnueabi >>> 5. Then make, make install, etc. >> > > I can confirm that the method works well, maybe you should add in your blog > post that libgps16, gps-utils and gpsd are needed.
Done > > Another issue: qtgps keeps on saying that there an 'error opening gpsd', > then i tried a low level access to gps, nothing worked (i already tried > before flashing and it worked well). > gps is power on > # gpspipe -r > gpspipe: could not connect to gpsd 127.0.0.1:2947, Connection refused(111) > > Make sure gpsd is instaled and running... > /etc/init.d/gpsd start Also make sure there are no other gpsd daemons running hogging the serial port. -- Jim Morris, http://blog.wolfman.com _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community