Yes,
there is a + on bottom right, a - on bottom left, a compas on top left
and a eta on top right as I activated them.
The plain map display is mostly ok (the info picture in the bottom
left may be a bit bigger to easier see it :-)
Am 14.12.2008 um 14:59 schrieb KaZeR:
Yorick Moko a écrit :
i did that but i get:
r...@om-gta02 ~ $ DISPLAY=:0 navit
navit:convert_to_attrs:failed to create attribute 'icons_xs' with
value '60'
vehicle_gpsd:vehicle_gpsd_try_open:Connected to gpsd fd=4
iochan=0x8a078 watch=0x2
navit:main:Using '/home/root/.navit/navit.xml'
and see no buttons (except for the zoom in and out button, but when i
press the top of the screen i do get into a settings-screen)
Using internal gui, it's intended to have no buttons when you are
viewing the map, in order to use most space for the map.
Touching the map should bring you a black screen with 3 buttons :
actions, settings and tools, each one with an icon.
Does that work for you?
It works, but what I mean, is, these are partly out of screen:
*=================*
| |
| |
*====* *====* *====*
| | | | | |
| | | | | |
*====* *====* *====*
| |
| |
| |
*====* *====* *====*
| | | | | |
| | | | | |
*====* *====* *====*
| |
| |
*=================*
Can these buttons moved by configuration ?
BTW, I now have tested the navigation with my car. It works reasonable
good.
But some crashes - while speaking I think - stops navit to work.
I need a simulation car. Could I create such a car by getting the
calculated route ?
I haven't activated tracking for my car definition in my last test :-(
Thanks
Lothar
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
-- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de
Lothar Behrens
Heinrich-Scheufelen-Platz 2
73252 Lenningen
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
