Hi, I am also interested to get my daily phone :-)
Why not just soldering another 10uF capacitor on top of the other. As I think soldering the capacitor to the shielding on the right yet requires an insulator. That way no long extra wires may be needed and no unsoldering is required. Some questions: I have read that making phone calls is impossible with that recamping, but I am able to do phone calls. I tried to start logging the battery with r...@om-gta02 ~ $ while true; do > date > mdbus -s org.freesmartphone.odeviced /org/freesmartphone/Device/ PowerSupply/battery org.freesmartphone.Device.PowerSupply.GetInfo > sleep 5 > done >> battery-data to compare the data, but I do not have mdbus command and it seems not to be installable with opkg (OM 2008). Where do I get it? What capacitor voltage is required or what capacitor could be used or where could I get a sample / buy one (22uF 0805 low-ESR)? I have no matching screwdriver, but an ESD save place to solder the capacitor with a Weller WECP 20. Is there any hardware fix party planned near stuttgart (I could provide the ESD equipment)? Is that ok? Thanks Lothar Am 22.07.2009 um 16:46 schrieb Daniel Willmann: > Hi, > > On Tue, 21 Jul 2009 16:48:25 +0400 > ivvmm <[email protected]> wrote: > >> Hello list, >> >> were there any successful fixes since posting >> http://lists.openmoko.org/pipermail/hardware/2009-May/001192.html >> >> Is this the final solution? Please post here your reports. > > Since about 5 days I'm using my #1024 fixed device as my main phone > (before I only used it with my test SIM) and so far stability is > pretty > good. I measured standby time (GSM on, phone in suspend) of around > 140h > which makes the Freerunner much more comfortable to use in my opinion. > While increasing the capacitance does work to solve #1024 the actual > problem is that the capacitor is not integrated in the regulator > feedback loop (iirc). So while it's not the correct solution it's > probably the best you can do without another hardware revision. > > > Regards, > Daniel Willmann > _______________________________________________ > Openmoko community mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/community -- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de Lothar Behrens Heinrich-Scheufelen-Platz 2 73252 Lenningen _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
