On Thursday 23 July 2009, Lothar Behrens wrote: > Hi, > > I am also interested to get my daily phone :-) > > Why not just soldering another 10uF capacitor on top of the other. As > I think soldering the capacitor to the shielding on the right > yet requires an insulator.
I don't think there's enough space under the can. If there had been I doubt people would have been using the methods in this thread: http://lists.openmoko.org/pipermail/hardware/2009-June/001230.html > That way no long extra wires may be needed and no unsoldering is > required. The method in the post above avoids the long wire and unsoldering, but still needs insulation above and below. > Some questions: > > I have read that making phone calls is impossible with that recamping, > but I am able to do phone calls. You can't make or receive the call when the phone isn't registered, and in worst case the phone will spend ~1/3 of the time reregistering. Networks seem to handle reregistrations differently though - O2 UK sometimes thought the phone was switched off when I called it, while Orange and t-mobile always connected. This may have been luck though... > I tried to start logging the battery with > > r...@om-gta02 ~ $ while true; do > > > date > > mdbus -s org.freesmartphone.odeviced /org/freesmartphone/Device/ > > PowerSupply/battery org.freesmartphone.Device.PowerSupply.GetInfo > > > sleep 5 > > done >> battery-data > > to compare the data, but I do not have mdbus command and it seems not > to be installable with opkg (OM 2008). > Where do I get it? It wouldn't help on om2008.x as it isn't using FSO. You should be able to use apm or the sysfs battery entry to get similar information though. See: http://wiki.openmoko.org/wiki/GTA02_sysfs _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
