Am 23.07.2009 um 18:11 schrieb Al Johnson: > On Thursday 23 July 2009, Lothar Behrens wrote: >> Hi, >> >> I am also interested to get my daily phone :-) >> >> Why not just soldering another 10uF capacitor on top of the other. As >> I think soldering the capacitor to the shielding on the right >> yet requires an insulator. > > I don't think there's enough space under the can. If there had been > I doubt > people would have been using the methods in this thread: > http://lists.openmoko.org/pipermail/hardware/2009-June/001230.html
Ok, I don't know. As of reported to work I would do it as described. But I also wait about my reseller (pulster) if this is a warranty. Then I wouldn't do the work by my self :-) If not, I would like to see some pictures from that. Are there any around? > > >> That way no long extra wires may be needed and no unsoldering is >> required. > > The method in the post above avoids the long wire and unsoldering, > but still > needs insulation above and below. The insulation I think is better than not doing it :-) > > >> Some questions: >> >> I have read that making phone calls is impossible with that >> recamping, >> but I am able to do phone calls. > > You can't make or receive the call when the phone isn't registered, > and in > worst case the phone will spend ~1/3 of the time reregistering. > Networks seem > to handle reregistrations differently though - O2 UK sometimes > thought the > phone was switched off when I called it, while Orange and t-mobile > always > connected. This may have been luck though... I indeed had some reregistering and saw that by the symbol :-) > > >> I tried to start logging the battery with >> >> r...@om-gta02 ~ $ while true; do >> >>> date >>> mdbus -s org.freesmartphone.odeviced /org/freesmartphone/Device/ >> >> PowerSupply/battery org.freesmartphone.Device.PowerSupply.GetInfo >> >>> sleep 5 >>> done >> battery-data >> >> to compare the data, but I do not have mdbus command and it seems not >> to be installable with opkg (OM 2008). >> Where do I get it? > > It wouldn't help on om2008.x as it isn't using FSO. You should be > able to use > apm or the sysfs battery entry to get similar information though. See: > http://wiki.openmoko.org/wiki/GTA02_sysfs > I am look forward to update to a newer version of whatever. There I only need something: Working phone (calls/sms), working GPS (with navit), working WLAN (at least with scripts). A plus would be bluetooth with headset for car radio and optionally working hands free. Has the Om2009 such a feature set? Thanks Lothar > -- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de Lothar Behrens Heinrich-Scheufelen-Platz 2 73252 Lenningen _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
