look here this could help, very comprehensive: http://design.me.dal.ca/acb/router.html
Also all you firewall believers.converts.dissertators please look here for a workable software firewall solution the classic may be too slow- need se30 min. or s2si and 7.5.5 and OT 1.12 to work... Oce I get my se30 configured I 'll let you all know.... need some bits...... :) andrew >I've acquired MacTCP v2.0.6 for System 6.0.8 on my Mac Plus (4MB) w/ an >Asante EN/SC ethernet adapter (drivers installed). After installing >MacTCP, I configure to my router's settings... > >IP address: 192.168.1.102 >Mask: 255.255.255.0 >Class: C >Gateway: 192.168.1.1 (my LinkSys DSL/Cable router) >DNS set to -nothing- > >...my router gets its info dynamically from the cable modem. Under OS X >I am able to specify the IP address of my G4 (192.168.1.100), the subnet >mask (255.255.255.0), and the router (192.158.1.1) and omit DNS settings >and have things work. But when I go to connect using Fetch 2.1.2, I get >an "AppleTalk not configured properly" error or something like the >same. Why would it be even looking at AppleTalk? I get this with >AppleTalk enabled or disabled in Chooser. It tells me to enable >AppleTalk. This is TCP/IP straight up we're talking about here, right? > >Any advice here? Thanks. > > > >bp -- Compact Macs is sponsored by <http://lowendmac.com/> and... SPECIAL LIST PRICES - Replacement Apple CDROMs from $19.99, MacOS 8.5 CD $79.99 PPC 5400/200Mhz 16/1.6GB/CD/ENET/L2 $119, 5+ for $99 <mailto:[EMAIL PROTECTED]> Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
