I've been fiddling with jumpers all night and have yet to get my SE/30 to see an external Seagate Elite ST410800N 9GB drive. I have it connected to the SE/30 through a cable which has an 50 pin internal connector (on the se/30 mobo) and an external HD50 plug hanging out of the back of the machine. I then have the hd50 pluged into the hd50 on the drive which is in an external case. The drive works fine when connected to my other Mac but the SE/30 refuses to see it. I even formatted it ahead of time in small partitions, and stuck 7.1 onto one of them. It simply will not recognize. Am I missing something?
I don't know what to do. I am wondering if the drive is simply not compatible with the SCSI on the SE/30. Thanks for any help. Eric -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
