At 00:53 -0500 on 06/02/03, EcoGeek wrote: >I've been fiddling with jumpers all night and have yet to get my SE/30 to >see an external Seagate Elite ST410800N 9GB drive. >I have it connected to the SE/30 through a cable which has an 50 pin >internal connector (on the se/30 mobo) and an external HD50 plug hanging out >of the back of the machine. I then have the hd50 pluged into the hd50 on the >drive which is in an external case. The drive works fine when connected to >my other Mac but the SE/30 refuses to see it. I even formatted it ahead of
It sounds like you have some termination issues. Is there an internal drive installed? Is there a terminator on the external? -- the pickle FAQ <http://macfaq.org/index.shtml> _________________________________________________________________ -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
