> >Should the solder pads lift off during > >the operation, is there anything that can glue them back in place and resist > >the heat of soldering?
> Nothing that I know of. > Without experience you're doomed to failure unless you use 2 soldering > irons with sharp tips. > Both leads must be heated at same time so that cap can be flicked off when > both solder joints are seen to be melted. Hmm. I smell imminent disaster coming my way. Well I'll try, and let everyone know how badly I manage to fubar it all. BTW, do you have any advice for soldering the new caps in? I have a feeling I'll have to end up improvising with PC-mounts since no place I know of here in .au sells SM components to the public in decent quantities... Thanking you all for all the help, Adam. -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
