On Wednesday, October 15, 2003, at 03:46 AM, John-Robert La Porta wrote:
As much as this subject has been beaten over the head, I have seen lately a lot of interest on the list about how to obtain video from compacts, and others searching for analog board pin-outs. I still need a way to get video from a Plus/SE/Classic and preserve its 512 x 342 resolution. If anyone knows how to do this, or has any ideas of how to get this type of picture on to a standard TV screen, any help would be appreciated. I am working on a big project and this is all that is holding me back. Thanks.
Power-R made adapters than plugged into the lines between the l/b and a/b. ISTR seeing one on eBay a while back. (They also did one for the 575 l/b, which I have but have never tried using).
The problem with the b/w ones is that they worked with very old b/w composite or TTL monitors, and that few modern ones would be happy at 512 x 342.
There is a design for a TTL video adapter on pp168ff of Macintosh Repair and Upgrade Secrets by Larry Pina, published by Hayden. However, the issue again is what you do these days with TTL video signals!
hth,
Stuart
-- Compact Macs is sponsored by <http://lowendmac.com/>.
Support Low End Mac <http://lowendmac.com/lists/support.html>
Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
