An update on the Mac 128k restoration. I finally gave up on the new analog board, however it has many good parts that could be used to restore the other board. I went ahead and replaced the bad Q4 transistor, and now instead of only getting a flup-flup, I get the flup&beep-flup&beep, as if the machine is actually starting up but gets interrupted because the video isn't working?. However, there is still trouble somewhere on the analog board. Any clues from here? I've adjusted the voltage pot, but it keeps doing the same thing. I figure I should be able to get one working board from the two problematic ones.
Thanks, Chris -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
