on 11/5/03 4:12 PM, Chris "Zap" at [EMAIL PROTECTED] wrote: > An update on the Mac 128k restoration. I finally gave up on the new > analog board, however it has many good parts that could be used to restore > the other board. I went ahead and replaced the bad Q4 transistor, and now > instead of only getting a flup-flup, I get the flup&beep-flup&beep, as if > the machine is actually starting up but gets interrupted because the video > isn't working?. However, there is still trouble somewhere on the analog > board. Any clues from here? I've adjusted the voltage pot, but it keeps > doing the same thing. I figure I should be able to get one working board > from the two problematic ones. > > Thanks, > Chris > >
Are you checking actual voltage output of that power supply? Jeff -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
