on 11/13/03 9:25 AM, Tatusko, Jonathan at [EMAIL PROTECTED] wrote: > Greetings, > > I was finally able to track down an active external SCSI-1 terminator > with LED in order to try and correct my SCSI woes. > > To refresh everyone, I'm attempting to get a troublesome MicroNet > 200 MB external harddrive to mount for use with my Macintosh SE/30 > which is running System 7.
> If I could get the SE/30 or SE not to hang I'd try the SCSI utilities on > them to try and diagnose the issue, but the 6100 is the only one that > comes close to working with the drive. > > Anyone have any more suggestions? I'm desperate, please help. > > Thank you for your indulgence in this matter. > > -Jon > What I do with mixed results is change the SCSI ID to 6 and work back until it works. Also boot with and then without the terminator at all SCSI ID's. Boot with a floppy, and an external floppy drive. Internal's loaded with System 6.0.8, external's got either the Micronet SCSI Formatting utility or Lido 7.56 or APS Formatting utility. Or, boot with System 7.6 Disk tools and try to get the drive to come alive with Drive Setup Lite. Jeff -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
