Does your SE have an internal hard drive? If so, you probably have a SCSI ID conflict when it is set to zero. Try booting the system from a floppy disk with the hard drive connected. Do you still have a dead Mac sign?
Byron. On Sun, Apr 11, 2004 at 12:12:44AM -0500, Luis wrote: > I have a MicroNet Raven Disk Array external hard drive that I would > like to use on my Macintosh SE FDHD. This hard drive had previously > been used on a Macintosh 7100/80 and is in good state. However, when > I connect it on my SE it doesn't seem to show up. Furthermore, when > I changed the SCSI ID on the back of the HD to 0 it made me have a > start up failure (blinking question mark)....any other SCSI ID # > yielded a dead mac sign. -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
