Hello, Thanks for the reply, unfortunately that didn't work. Any other suggestions? There isn't another video in/out...at least not one that looks like the male VGA that my monitor uses. I'm basically just using a long VGA cable to connect it to a VGA in on my TV. I hoe there's something else I can try!
Thanks again, -Josh On Thu, Mar 19, 2009 at 12:16 PM, Ceresia <[email protected]> wrote: > > Does your desktop tower have two video outs on it? > > The BIOS screen and Windows XP boot screen use a generic display that > any monitor / tv would work with, but once it boots into windows it > assumes your settings from your previous monitor. > > If you only have one setting then try to hook your normal monitor up > to your PC. > > Change the resolution in your video settings to 800x600 for now. > Change the color quality to 16 bit or less. > > Hopefully once you do this and reboot with your TV hooked up it will > work, then you will be able to fiddle with your resolution settings to > see where your TV will max out at and not go blank. > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Computer Tech Support" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/computer-tech-support?hl=en -~----------~----~----~----~------~----~------~--~---
