The other drives I added, are not in use yet, on purpose.  Only one SCSI drive 
is active.  That is the one I have been using.

The card is an AHA-19160 and, the active HD is a U320.  All the other HD's are 
not connected to the power supply or, to the data cable.

Once I can get the CD-R/W to be recognized for the boot, then I am sure, things 
will be ok but, until then, I am stuck.

-------------- Original message -------------- 
From: "Rev. Stewart Marshall" <[EMAIL PROTECTED]> 

> IDE is simple. If it is the only one make sure it is set as master. 
> 
> On the U160/U320 which are SCSI drives. 
> 
> You have them plugged into their adapters, and I assume they are both 
> properly terminated? 
> 
> Once you make sure they are terminated, I am not sure how to make the 
> BIOS recognize them but the old way to turn the drive ID to zero in 
> the old BIOS. 
> 
> You also need to make sure you the proper drivers in the WinXp installation. 
> 
> Also note you must make sure the SCSI BIOS is booting and recognizing 
> the drives. Make sure you have that set up properly. 
> 
> I have never set up XP with SCSI drives so I am not sure of what all 
> needs to be done, but the settings in all of the BIOS's need to be 
> set properly. 
> 
> Stewart 


************************************************************************
* ==> QUICK LIST-COMMAND REFERENCE - Put the following commands in  <==
* ==> the body of an email & send 'em to: [EMAIL PROTECTED] <==
* Join the list: SUBSCRIBE COMPUTERGUYS-L Your Name
* Too much mail? Try Daily Digests command: SET COMPUTERGUYS-L DIGEST
* Tired of the List? Unsubscribe command: SIGNOFF COMPUTERGUYS-L
* New address? From OLD address send: CHANGE COMPUTERGUYS-L YourNewAddress
* Need more help? Send mail to: [EMAIL PROTECTED]
************************************************************************
* List archive at www.mail-archive.com/[email protected]/
* RSS at www.mail-archive.com/[email protected]/maillist.xml
* Messages bearing the header "X-No-Archive: yes" will not be archived
************************************************************************

Reply via email to