Phil Dibowitz ([EMAIL PROTECTED]) wrote:
> Kevin Gilbert wrote:
> > Hi,
> >
> > Experiencing a bit of trouble with --write-config. I'm using a file
> > produced
> > by harmony with the command:
> >
> > harmony -v --write-config harmony_config_1
> >
> > but this consistently give the following.
>
> On a whim, could you try 0.12? I noticed this is dying in EraseFlash, and I
> changed EraseFlash pretty significantly going into 0.13, and while it should
> theoretically have the same result, I'd like to make sure it wasn't my
> change that broke things for you.
Sorry, you seem to have broken something: it works with 0.12:
[EMAIL PROTECTED]:/home/simon/pakete/harmony-0.12# ./harmony -w -C
~simon/Update.EZHex
Harmony Control 0.12
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
Requesting Identity: *********************done
Model: Logitech Harmony 525 (Mocha Decaf)
Firmware Version: 2.6
Hardware Version: 2.5
Config Flash Used: 19% (77 of 384 KiB)
Invalidating flash: done
Erasing flash: ** done
Writing config: 100% 76 KiB done
Verifying Config: 100% 76 KiB done
Reseting...
Ok, cool, seems there is no malicious change on Logitechs side :)
Will look into this further.
Thanks,
Simon
--
[EMAIL PROTECTED] http://simon.budig.de/
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
