Hi Sebastian, On Thu, 4 Apr 2013, Sebastian Cabrera wrote:
> I just checked out the zwave_work_branch and did some testing. > > Harmony One: > Identity Check - Pass > Reset - Pass > Config Dump - Pass > Config Update (from dump) - Pass Awesome, thanks! > I'm not sure how the learn-ir should work.... > > concordance --force --learn-ir test.file > Concordance 0.23+CVS > Copyright 2007 Kevin Timmerman and Phil Dibowitz > This software is distributed under the GPLv3. > > ERROR: Cannot read input file: test.file For IR learning, you have to go to members.harmonyremote.com, go into "More Options" for one of your devices, and then "Learn infrared commands." You can pick an existing command, or add a new one. When you do that, it will give you a LearnIR.EzTut file that you can feed into concordance. It will prompt you to press a key on a remote to learn. > Is it save to do some testing with the firmware update? I wouldn't recommend it. I'm pretty sure I didn't implement the firmware update for the One. Scott ------------------------------------------------------------------------------ Minimize network downtime and maximize team effectiveness. Reduce network management and security costs.Learn how to hire the most talented Cisco Certified professionals. Visit the Employer Resources Portal http://www.cisco.com/web/learning/employer_resources/index.html _______________________________________________ concordance-devel mailing list concordance-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/concordance-devel
