Hi Patrik, I am trying to write a sample C application to connect to a specific wifi access point. I am able to do it for an unprotected access point, however is there a way I can pass the required passphrase ?
Do we have a different procedure to it ? [may be something like as below] 1. assign passphrase to a service 2. connect to the service Or something like above. Please help me. Waiting for your response. Regards, <Ram> -----Original Message----- From: connman [mailto:[email protected]] On Behalf Of Patrik Flykt Sent: Wednesday, March 11, 2015 8:05 PM To: [email protected] Subject: Re: connman connection policy On Wed, 2015-03-11 at 10:56 +0000, Kallumari Nagaraja Rao, RammohanX wrote: > Following stuffs are happening, > 1. I am initially connected to wifi -> out of wifi connection -> > switches back to cellular 2. otherway round when I come inside the > purview of a wifi access, it does not disconnect from cellular and > connect to wifi service. Please provide the relevant output from 'connmanctl monitor services' so that there is a complete high level picture of what is going on. If you have manually manually connected some of these networks use connmanctl in interactive mode so that the monitoring output and the commands you use are nicely pretty-printed in sequence. As you may have hit a bug of some sort, please also provide the log output with 'connmand -d' for the above case. Cheers, Patrik _______________________________________________ connman mailing list [email protected] https://lists.connman.net/mailman/listinfo/connman _______________________________________________ connman mailing list [email protected] https://lists.connman.net/mailman/listinfo/connman
