Hi,
Just now got the go ahead about disclosing the use cases.
Our requirement is having two P2P GO, one at 2.4 Ghz and another 5 Ghz in
parallel, and our chip vendor confirmed that will only be possible by using two
Supplicants.
This should work with one wpa_supplicant, unless the chip vendor's
driver is weirdly done.
Afaik, intel or atheros work properly, but if it's none of those... ;)
In ConnMan side that's another story, you would need to tweak still
quite some stuff to enable that.
In any case, having ConnMan in the picture brings some work: if you have
2 wpa_s, you will need to
change some stuff to make it work (and it's ugly as hell), if you have 2
wpa_s and 2 connman... same thing (and it's ugly too).
The very best solution would be one wpa_s and one connman, as usual.
In connman repository, there is a q&d test script for wpa_supplicant
dbus interface, for P2P named p2p-on-supplicant
Try playing with it, creating more than 1 GO.
Then you will know what's needed (well, mostly) to do in ConnMan.
Tomasz
_______________________________________________
connman mailing list
[email protected]
https://lists.connman.net/mailman/listinfo/connman
