https://bugs.contribs.org/show_bug.cgi?id=10300
--- Comment #65 from Dave Liquorice <[email protected]> ---
(In reply to Jean-Philippe Pialasse from comment #64)
> (In reply to Dave Liquorice from comment #63)
>> (In reply to Jean-Philippe Pialasse from comment #59)
> just build a new one only for SME9 so you will be able to test.
>
> /usr/bin/plague-client build djbdns djbdns-1_05-11_el6_sme sme9
<snip>
> How I test :
> 3 terminals
> one with
> tail -f /var/log/dnscache.forwarder/current|tai64nlocal
> one with :
> tail -f /var/log/dnscache/current|tai64nlocal
Too much "noise" in those for me to work out what they are trying to tell me.
B-)
So I'll fall back to dehydrated -c and those digs but flushing both
dnscache.forwarder and dnschache.
djbdns-1_05-11 works (-10 basically didn't). After flushing both caches look
ups take around 1/2 to a second longer than the -8 version, we are talking 3 to
4+ seconds. Both -8 and -11 have occasional look up time outs straight after
flushing both caches. Note I wasn't flushing both caches when testing -8
before.
Subsequent lookups pre TTL expiry are instant (0 ms), just after post TTL
expiry 30 to 40 ms, at some time (minutes) after a TTL expiry the lookup goes
back to seconds but not as long as the 1st lookup after a flush. Look up
failures appear to only occur straight after both caches have been flushed.
Presumably becuase getting all the akamai information is taking too long?
--
You are receiving this mail because:
You are the QA Contact for the bug.
_______________________________________________
Mail for each SME Contribs bug report
To unsubscribe, e-mail [email protected]
Searchable archive at https://lists.contribs.org/mailman/public/contribteam/
