Thanks for your answer.
If you need it, I can send you the "install.log".
Marc
Florin Grad <[EMAIL PROTECTED]>@mandrakesoft.com sur 24/04/2001
00:04:58
Veuillez r�pondre � [EMAIL PROTECTED]
Envoy� par : [EMAIL PROTECTED]
Pour : [EMAIL PROTECTED]
cc :
Objet : Re: [Cooker-firewall] Cooker Bugs report
[EMAIL PROTECTED] writes:
> Hello,
> Based on the following config. :
> - Duron motherboard with 64M,
> - 2 identical NICs : D-Link DFE-530TX (kernel module : via-rhine)
> eth0 connected on local network
> eth1 connected on ADSL modem (ECI Xtense 500),
>
> I've got the following bugs with rc1 version :
> 1) at installation, error at NIC detection with message
> " insmod'ing module via-rhine failed at /usr/bin/perl-install/modules.pm
> line 486
> insmod'ing module via-rhine failed at /usr/bin/perl-install/modules.pm
> line 486"
> (I've no pb of IRQ or DMA conflict)
> so I've skipped over the network instal to do it later on.
>
> Then , on local console, I've insmod'ed without any problem eth0, plus
> declared it as INTERNAL INTERFACES in
> /etc/bastille-firewall.conf to have access through the network to Naat
> where I terminated the config for eth1, ADSL,...
> everything working great.
> Question : where is the best file to hand-write my eth0 declaration ? as
> my modif of /etc/bastille-firewall.conf is overwritten by naat
> after my declaration of eth1.
Hi there,
The Installation we're using is the a slightly modyfied installation of
the Mandrake 7.2 and it uses a different kernel that the ones installed
after the installation. So, we might have forgotten the via-rhine modules
in the installation kernel. The post-install kernel seems to be ok.
I'll have a look on this...
have a nice day,
--
Florin http://www.mandrakesoft.com
