OK got back to this:

2.2.19 kernel - before kppp

[root@imac root]# lsmod
Module                  Size  Used by
soundcore               3392   0  (autoclean) (unused)
bmac                   12384   1  (autoclean)
bttv                   35632   0  (unused)
i2c-old                 5104   1  [bttv]
videodev                3264   2  [bttv]
usb-ohci               16912   0  (unused)
mesh                   18368   0  (unused)

added line:

alias serial macserial 

in /etc/modules.conf - the lastest installer/detection routine should od
this for you

I added a new entry in kppp, with the dialog based setup for a remote
site.

name
phone number
PAP

device settings - all default (/dev/modem, symlinked to /dev/ttyS0)
no changes in any of the rest of the settings

after connection:

[root@imac root]# lsmod
Module                  Size  Used by
ppp_deflate            44832   2  (autoclean)
bsd_comp                4512   0  (autoclean)
ppp                    26432   2  (autoclean) [ppp_deflate bsd_comp]
slhc                    4448   1  (autoclean) [ppp]
macserial              43040   2  (autoclean)
soundcore               3392   0  (autoclean) (unused)
bmac                   12384   1  (autoclean)
bttv                   35632   0  (unused)
i2c-old                 5104   1  [bttv]
videodev                3264   2  [bttv]
usb-ohci               16912   0  (unused)
mesh                   18368   0  (unused)


My experience has been it's best to load just macserial, not the normal
serial driver, although your lsmod listing showed them both.  I have
connected with both before too, but it seems flakey at times.  Adding the
alias will load only macserial. You could force both with the following
stanza in /etc/modules.conf:

above serial macserial

I tested it this way too, and it also worked, with serial showing in lsmod
as unused:

serial                 41408   0  (autoclean) (unused) 

This was all as root.  Seemed to be OK as user "stew" too.

With 2.4.4, some of the module names change, but everything else remains
the same:

[root@imac root]# lsmod
Module                  Size  Used by
ppp_deflate            44000   2  (autoclean)
bsd_comp                4768   0  (autoclean)
ppp_async               8464   1  (autoclean)
ppp_generic            23072   3  (autoclean) [ppp_deflate bsd_comp
ppp_async]
macserial              38256   2  (autoclean)

Now it could be that you have a particularly difficult modem.  I've heard
some of the newest machines have troublesome ones. But it may just require
adding the alias entry like above.

HTH,
Stew Benedict

-- 
MandrakeSoft    OH/TN, USA      http://perso.mandrakesoft.com/~sbenedict/





Reply via email to