Le Vendredi 22 F�vrier 2002 01:13, Stew Benedict a �crit : > On Fri, 22 Feb 2002, Olivier Thauvin wrote: > > Mandrake Linux Cooker-ppc 20020221 18:51 > > Titanium G4 500 Mhz / 20 Go HD / 256 Mo RAM > > > > I'have do a net install and here a report of problems, thanks to > > listenners > > > > 1) I select net install my network card are not automactilly detect > > (gmac), but when I install from the CD, when it is time for the net > > configuration, the net device is correctly detect and do not need any > > intervention to setup the module. Is it normal ? I haven't do that with > > the 8.0. > > > > And for a net device I see all module, include SCSI, USB... > > This is normal. Stage1 does not do any detection, as by design it it > targeted to fit on a floppy, so its fairly limited. Stage 2 tries to > detect the hardware, but is also a much larger program. >
I'm surprise, it do a net-usb device. But it is bot a gig problem, the main net device have good comment. > > 2) Atfer setup the partitionning, DrakX can't mount /dev/hda15, no such > > device, this does appear when I install from de CD. I think this is a bug > > from 8.0, we can't setup only the hda1 to about hda12 exist. > > Shouldn't make any difference CD or net, but I'll check it out. I'm > pretty sure I'm using beyond partition 12 on the iMac. This messages appeare after the format, the mke2fs on partition seems ok but just after it only (in french, I tranlate) An error as occure, the mount failed: No such device. > > > I can't do more by this way and I can't take a text console to do a > > diagnostic > > Command-Ctl-FX doesn't get you to the VT's? OK ! I have test CTRL+ALT (and fn on my titanium), Maj+CTRL but not Command+Ctrl, thanks. I can now report to you the message from console: Step `doPartitionDisks' finished Formating device hda15 (type Jou... FS: ext3) running: mke2fs -j /dev/hda15 running: tune2fs -c0 -i0 /dev/hda15 mounting hda15 on /mnt/ as type ext3, option noatime running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/jbd.o warning: insmod'ing module jdb failed at /usr/bin/perl-install/modules.pm line 613. running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/ext3.o warning: insmod'ing module ext3 failed at /usr/bin/perl-install/modules.pm line 613. warning: mount failed: No such device at usr/bin/perl-install/modules.pm line 607. Of course all /dev/hdaxx exists ! It is the same things with reiserfs but there are no problem with ext2. I will use it for this install and convert my / after the install. > > Stew Benedict -- Olivier Thauvin-CNRS Service Aeronomie [EMAIL PROTECTED] T�l�phone: 01 64 47 43 60 � Verri�res (lundi,mercredi et vendredi) 01 44 27 47 59 � Jussieu (Mardi et Jeudi) Service d'A�ronomie R�duit de Verrieres - BP 3 Route des Gatines 91371 Verrieres le Buisson Cedex France Fax:33 (0)1 69 20 29 99
