Hmm This is an upgraded hd with OSX in the first 7.5GB and a data drive in
the second 7.5GB, with the remaining 15 or so GB being free space (and being
where I am attempting to put the "blessed partition", the /boot partition,
the / partition and the /swap partition...

How could I get yaboot into the first 2GB without repartitioning? Can it be
installed thru OSX?

Damon
----- Original Message -----
From: "Stew Benedict" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, October 03, 2002 7:36 PM
Subject: Re: iMac266, OSX Man82ppc installation won't boot


>
> On Thu, 3 Oct 2002, Damon Garn wrote:
>
> >
> > Hmmm maybe I'm too tired to be doing this... I didn't do the chroot /mnt
> > "correctly" the first time and so my lack of a yaboot wasn't really
> > accurate. Sorry. Anyway, once I discovered this I (correctly) went to
the
> > system's root and verified several things as suggested in previous
posts:
> >
> > 1. yaboot.conf looks "normal" to me; I've reproduced it below:
> >
> > #yaboot.conf - generated by Drakx
> > init-message="\nWelcome to Mandrake Linux!\n"
> > boot=/dev/hda8
> > ofboot=hd:8
> > delay=30
> > timeout=50
> > install=/usr/local/lib/yaboot/yaboot
> > magicboot=/usr/loca/lib/yaboot/ofboot
> > enablecdboot
> > enableofboot
> > defaultos=linux
> > default=linux
> > image=hd:9,/vmlinuz-2.4.18-6.1mdk
> >                 label=linux
> >                 root=/dev/hda11
> >                 initrd=hda:9,/initrd-2.4.18-6.1mdk.img
> >                 append=" devfs=mount"
> >                 read-only
> > image=hd:9,/vmlinuz-2.4.18-6.1mdk
> >                 label=failsafe
> >                 root=/dev/hda11
> >                 initrd=hda:9,/initrd-2.4.18-6.1mdk.img
> >                 append=" devfs=mount failsafe"
> >                 read-only
> > macos=hd:6
> >
> >
> > 2. ran ybin -v and it confirmed installation and configuration. Output
as
> > follows:
> >
> > ybin: /proc filesystem is not mounted, nvram will not be updated
> > ybin: installing first stage bootstrap /usr/local/lib/yaboot/ofboot onto
> > /dev/hda8
> > ybin: installing primary bootstrap /usr/local/lib/yaboot/yaboot onto
> > /dev/hda8
> > ybin: installing /etc/yaboot.conf onto /dev/hda8
> > ybin: Setting attributes on ofboot...
> > ybin: Setting attributes on yaboot...
> > ybin: Setting attributes on yaboot.conf...
> > ybin: Blessing /dev/hda8 with Holy Penguin Pee...
> >
> > Could the Holy Penguin Pee have shorted out my system?
> >
> > 3. during the rescue mode boot from CD it finds the following: "probable
> > root partition on /dev/hda11 (type ext3)" and "Mounting /dev/hda9 on
> > /mnt/boot type ext2"
> >
> > What about the i386 versions of Linux where the boot info must reside
within
> > the first 1024 cylinders of the drive?
> > Damon
> >
>
> There was a problem on some of the old iMacs where yaboot needed to be in
> the first 2GB? or so.  Wasn't much of an issue until folks started
> upgrading them with big drives.
>
> Stew Benedict
>
> --
> MandrakeSoft
> PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3
> IRC: irc.openproject.net #cooker-ppc
>
>


Reply via email to