Pixel wrote:
> PRIILOT Michel <[EMAIL PROTECTED]> writes:
>
> > Hi again,
> > Two news, a bad and a good.
> > good first: Install is complete
> > the bad: the freshly installed cooker don't boot:
> > "kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno =2"
> > (repeated two times)
> > "kmod: failed to exec /sbin/modprobe -s -k block-major-8, errno =2"
> > "VFS: Cannot open root device 08:02"
> > "Kernel panic: VFS: Unable to mount root fs on 08:02"
> >
> > My config:
> > a Dell optiplex with an adaptec scsi adaptator.
> > Is the initrd generation omitting the necessary scsi module for boot ?
> >
>
> maybe
> could you find out the problem. Just after the lilo step, you can go and find
> out on the console (F2):
>
> chroot /mnt (and get a real bash)
> check the /mnt/etc/lilo.conf
> check the /mnt/boot/initrd-*.img by mounting it in -o loop
>
> good luck!
>
> > Hoops, another problem at lilo install when I try for a floppy boot:
> > "no floppy device avaible at /usr/bin/perl-install/lilo.pm line 32"
> >
>
> this one is corrected.
>
> > I check the mirror and if news, I retry.
> >
>
> well for the lilo problem, i don't think i'll change as i don't know what to
> correct.
>
> thanks, cu Pixel.
Hello again & again..
Thank for the trip.. "chroot /mnt" was the good thing to do.
For aall the other's, follow some info
in lilo.conf there was
"boot=/dev/sda" ok
"map=/boot/map" ok
"install=/boot/boot.b" ok
"prompt" ok
"timeout=50" already ok
image=/boot/vmlinuz" WARNING, good if good link in "boot"
dir.
label....
...
..
in partition "BOOT"
"vmlinuz -> vmlinuz-2.3.13-2mdk" (symbolink link)
"module-info -> module-info-2.3.13-2mdk"
"System-map -> System-map.2.3.13-2mdk"
I think there are some errors and a change for:
"vmlinuz -> vmlinuz->2.2.11-2mdk"
"module-info -> module-info-2.2.11-2mdk"
"System-map -> System-map.2.2.11-2mdk"
For the "initrd file, NO problem, it was really "initrd-2.2.11-2mdk" and was
uniq.
I list also "conf.modules" OOOPPS, all in is good but 20 lines !!!, I remove the
repeated lines and
after this changes, I execute a "lilo"., go back on tty5, do the X configuration
and
after the last message I reboot...
WIN, WIN, all is good. X is right and kde more and more cool.
Now, I will carry out in this new cooker and feedback if needed.
