http://qa.mandrakesoft.com/show_bug.cgi?id=2940
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEW
------- Additional Comments From [EMAIL PROTECTED] 2003-03-21 20:42 -------
Currently pilot-xfer does not communicate between the USB Visor and the terminal.
Currently when using pilot-xfer there is no result. With Mdk 8.2, this USB visor was
able to synchronize data with evolution.
gpilotd gives error messages that there is no device.
When using USBview, and pressing the hotsync button, the device appears on the list of
available devices.
I followed the instructions as best I could at
/usr/share/doc/pilot-link-0.11.7/README.usb, but still can make the palm connect to
pilot-xfer, nor to gpilotd (evolution).
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: NEW
creation_date:
description:
With Mandrake 8.2 I could synchronize a Handspring visorPrro with Evolution, and it
was seen by USBVIEW. Now, I cannot synchronize the pilot and, the pilot is not seen
by USBVIEW. When I try to use USBVIEW to verify the connection, I receive the
following error
Can not (sic) open the file /proc/bus/usb/devices.
Verify taht you have USB compiled into your kernel, have the USB Core modules loaded,
and have the usbdevfs filesystem mounted.
I am using a USB keyboard and mouse, and both work well.
the output of /proc/bus/usb/devices is:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=2460
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=329/900 us (37%), #Int= 3, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=2440
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=049f ProdID=000e Rev= 1.02
S: Manufacturer=Chicony
S: Product=Compaq Internet Keyboard
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=keyboard
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usb_mouse
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=045e ProdID=0040 Rev= 1.21
S: Manufacturer=Microsoft
S: Product=Microsoft Wheel Mouse Optical�
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usb_mouse
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
