> > I have a machine with a Mylex DAC960 and an adaptec, the initial probe
> > sees the adaptec, then I answer "yes" for more scsi controllers, select
> > Mylex DAC960 from the list, hit OK and it finds it. I was in an
> > Expert/Development installation.
>
> can you give the output of lspcidrake?
Here goes =) Probably much more output than needed, but better more than
less.
-dwild
----------------------------
[root@foghorn dwild]# lspcidrake
Intel Corporation|440GX - 82443GX Host bridge (unknown ignore)
Intel Corporation|440GX - 82443GX AGP bridge (unknown ignore)
Adaptec|7896 (STORAGE_SCSI aic7xxx)
Adaptec|7896 (STORAGE_SCSI aic7xxx)
Intel Corporation|82557 [Ethernet Pro 100] (NETWORK_ETHERNET eepro100)
Intel Corporation|82371AB PIIX4 ISA (unknown unknown)
Intel Corporation|82371AB PIIX4 IDE (STORAGE_IDE unknown)
Intel Corporation|82371AB PIIX4 USB (SERIAL_USB usb-uhci)
Intel Corporation|82371AB PIIX4 ACPI (unknown unknown)
Cirrus Logic|GD 5480 (DISPLAY_VGA Card:Cirrus Logic GD5480)
DEC|DECchip 21150 (unknown unknown)
Intel Corporation|80960RP [i960 RP Microprocessor/Bridge] (unknown
unknown)
Mylex Corporation|DAC960PX (STORAGE_RAID DAC960)
[root@foghorn dwild]# lspci
00:00.0 Host bridge: Intel Corporation 440GX - 82443GX Host bridge
00:01.0 PCI bridge: Intel Corporation 440GX - 82443GX AGP bridge
00:0c.0 SCSI storage controller: Adaptec 7896
00:0c.1 SCSI storage controller: Adaptec 7896
00:0e.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100]
(rev 08)
00:12.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:12.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:12.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:12.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:14.0 VGA compatible controller: Cirrus Logic GD 5480 (rev 23)
01:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21150 (rev 06)
02:07.0 PCI bridge: Intel Corporation 80960RP [i960 RP
Microprocessor/Bridge] (rev 03)
02:07.1 RAID bus controller: Mylex Corporation DAC960PX (rev 03)
[root@foghorn dwild]# lspci -vvv
00:00.0 Host bridge: Intel Corporation 440GX - 82443GX Host bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64 set
Region 0: Memory at f8000000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440GX - 82443GX AGP bridge (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Bus: primary=00, secondary=01, subordinate=03, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fc000000-fc0fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B+
00:0c.0 SCSI storage controller: Adaptec 7896
Subsystem: Adaptec: Unknown device 080f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 39 min, 25 max, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 19
BIST result: 00
Region 0: I/O ports at 2000
Region 1: Memory at f4100000 (64-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.1 SCSI storage controller: Adaptec 7896
Subsystem: Adaptec: Unknown device 080f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 39 min, 25 max, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 19
BIST result: 00
Region 0: I/O ports at 2400
Region 1: Memory at f4101000 (64-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100]
(rev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Management
Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 56 max, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f4102000 (32-bit, non-prefetchable)
Region 1: I/O ports at 2800
Region 2: Memory at f4000000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
Flags: PMEClk- AuxPwr- DSI+ D1+ D2+ PME+
Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
00:12.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 set
00:12.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev
01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Region 4: I/O ports at 2860
00:12.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev
01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Interrupt: pin D routed to IRQ 21
Region 4: I/O ports at 2840
00:12.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:14.0 VGA compatible controller: Cirrus Logic GD 5480 (rev 23) (prog-if
00 [VGA])
Subsystem: Cirrus Logic CL-GD5480
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 2 min, 10 max, 64 set
Region 0: Memory at f6000000 (32-bit, prefetchable)
Region 1: Memory at f4103000 (32-bit, non-prefetchable)
01:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21150 (rev
06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B+
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 240 set, cache line size 08
Bus: primary=01, secondary=02, subordinate=03, sec-latency=68
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind
bridge: 00000000fc000000-00000000fc000000
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:07.0 PCI bridge: Intel Corporation 80960RP [i960 RP
Microprocessor/Bridge] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B+
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 208 set, cache line size 08
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
02:07.1 RAID bus controller: Mylex Corporation DAC960PX (rev 03)
Subsystem: Mylex Corporation: Unknown device 0010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B+
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set, cache line size 08
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc000000 (32-bit, prefetchable)
[root@foghorn dwild]#
-dwild
