http://qa.mandrakesoft.com/show_bug.cgi?id=5747
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |UNCONFIRMED
------- Additional Comments From [EMAIL PROTECTED] 2003-18-09 22:00 -------
Hello,
here are the results of your instructions of the day, I found this:
AC'97 0:0 does not respond - RESET
Intel ICH soundcard not found or device busy
???
[EMAIL PROTECTED] jj]$ grep sound-slot /etc/modules.conf
alias sound-slot-0 snd-intel8x0
[EMAIL PROTECTED] jj]$ dmesg
Linux version 2.4.21-0.13mdk ([EMAIL PROTECTED]) (gcc version 3.2.2
(Mandrake Linux 9.1 3.2.2-3mdk)) #1 Fri Mar 14 15:08:06 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fcf0000 (usable)
BIOS-e820: 000000000fcf0000 - 000000000fcff000 (ACPI data)
BIOS-e820: 000000000fcff000 - 000000000fd00000 (ACPI NVS)
BIOS-e820: 000000000fd00000 - 000000000fe00000 (usable)
BIOS-e820: 000000000fe00000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
254MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 65024
zone(0): 4096 pages.
zone(1): 60928 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux ro root=306 quiet devfs=mount
hdd=ide-scsi acpi=off
ide_setup: hdd=ide-scsi
Found and enabled local APIC!
Initializing CPU#0
Detected 2666.393 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 5321.52 BogoMIPS
Memory: 253744k/260096k available (1410k kernel code, 5900k reserved, 1118k
data, 136k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2666.5170 MHz.
..... host bus clock speed is 133.3257 MHz.
cpu: 0, clocks: 1333257, slice: 666628
CPU0<T0:1333248,T1:666608,D:12,S:666628,C:1333257>
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030122
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xfd99d, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
PCI: Found IRQ 11 for device 00:02.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
vesafb: framebuffer at 0xf8000000, mapped to 0xd0800000, size 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:e710
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 25593 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
PCI: Found IRQ 5 for device 00:02.6
PCI: Sharing IRQ 5 with 00:02.7
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
PCI: Found IRQ 11 for device 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS646 ATA 133 controller
ide0: BM-DMA at 0x2400-0x2407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2408-0x240f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST380021A, ATA DISK drive
blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
hdd: CW088D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 108k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
SiS router pirq escape (96)
SiS router pirq escape (96)
usb-ohci.c: USB OHCI at membase 0xd4932000, IRQ 9
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
SiS pirq: advanced IDE/ACPI/DAQ mapping not yet implemented
advanced SiS pirq mapping not yet implemented
usb-ohci.c: USB OHCI at membase 0xd4934000, IRQ 11
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Assigned IRQ 10 for device 00:03.2
usb-ohci.c: USB OHCI at membase 0xd4936000, IRQ 10
usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] 7001 (#3)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
Adding Swap: 506008k swap-space (priority -1)
hub.c: new USB device 00:03.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x45e/0x27) is not claimed by any active
driver.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input0: USB HID v1.00 Gamepad [Microsoft� Microsoft� SideWinder� Plug & Play
Game Pad] on usb1:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4321 Wed Mar
5 19:13:04 PST 2003
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: CyberDrv Model: CW088D CD-R/RW Rev: 110F
Type: CD-ROM ANSI SCSI revision: 02
hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.1a [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
PCI: Found IRQ 9 for device 00:06.0
eth0: ADMtek Comet rev 17 at 0x2000, 00:30:05:35:31:DA, IRQ 9.
inserting floppy driver for 2.4.21-0.13mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/48x writer cd/rw xa/form2 cdda tray
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
PCI: Found IRQ 5 for device 00:02.7
PCI: Sharing IRQ 5 with 00:02.6
AC'97 0:0 does not respond - RESET
Intel ICH soundcard not found or device busy
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: Detected SiS 646 chipset
agpgart: AGP aperture is 64M @ 0xf0000000
Splash status on console 0 changed to off
PPP BSD Compression module registered
PPP Deflate Compression module registered
Regards.
Le Jeudi 18 Septembre 2003 10:16, [tvignaud] a �crit :
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date:
description:
After installing mandrake 9.2 RC2 on a
FUJITSU-SIEMENS
SCALEO 600I 2663
Chipset SIS645DX/ 962L
Audio on board Sigmatel STAC9750 AC97
I get no sound
It was the same with Mandrake 9.1
Thank you in advance for your help.
JJ Guezennec
[EMAIL PROTECTED]
[EMAIL PROTECTED]
