--- David Walluck <[EMAIL PROTECTED]> wrote:
> On Mon, 3 Jul 2000, Povl H. Pedersen wrote:
>
> > At 22:11 02-07-2000 -0700, you wrote:
> >
> >
> > I have had the chipset support enabled for a long
> time. So either
> > you forget to add the idebus=41 (or whatever) on
> your overclocked
> > machine, or you are running into hardware related
> problems. I
> > remember seeing that only IBM and Western Digital
> drives can
> > reliable run in an overclocked machine. I have IBM
> drives only.
> >
>
> I have an AMD k6 400 (NOT overclocked) and a WDC 18G
> drive. Of course it's
> hardware related. The IDE chipset is hardware, but
> you can't just narrow
> it down to that like you do, you don't even have the
> same chipset as I do
> apparently.
PPro200 here, no overclocking. I also have a Promise
Ultra66 card with a rather unusual set-up: ide0&1 on
the promise and ide2&3 on the mobo. I have WD and a
Maxtor
With the previous kernel, 2.2.16-??mdk I had DMA time
outs on one drive, but it had like 3 or 4 error
messages and then continued with the bootup; but now
it just hangs.
Funny thing is that this only happens with one drive,
and I have 4; and it is not even the first (hdc, which
means 1st drive on 2nd channel on the Promise card) ...
=====
________________________
Eugenio Diaz, BSEE/BSCE
Linux Engineer
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/
