Flroin,
I repeat again for your information. there is no
draknet in my machine. So i'm running drakconnect. I
configure my n/w connection. Now i run, drakgw,
internet connection sharing tool, and getting a error
message, when i choose to enable the connection.
[root@prabuhomepc prabu]# drakconnect
modprobe: Can't locate module serial
modprobe: Can't locate module serial
Please wait while probing serial ports...
Shutting down interface eth0:
[ OK ]
Shutting down interface eth1:
[ OK ]
Shutting down loopback interface:
[ OK ]
Disabling IPv4 packet forwarding:
[ OK ]
Setting network parameters:
[ OK ]
Bringing up loopback interface:
[ OK ]
Enabling IPv4 packet forwarding
[ OK ]
Bringing up interface eth0:
[ OK ]
Bringing up interface eth1:
[ OK ]
[root@prabuhomepc prabu]# ifconfig
eth0 Link encap:Ethernet HWaddr
00:04:76:D4:FB:4D
inet addr:202.156.164.199
Bcast:255.255.255.255 Mask:255.255.240.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST
MTU:1500 Metric:1
RX packets:410724 errors:0 dropped:0
overruns:0 frame:0
TX packets:158420 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:68280953 (65.1 Mb) TX
bytes:15559747 (14.8 Mb)
Interrupt:5 Base address:0xd000
eth1 Link encap:Ethernet HWaddr
00:E0:29:3C:38:44
inet addr:192.168.0.1 Bcast:192.168.0.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:332 errors:0 dropped:0 overruns:0
frame:0
TX packets:153 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:100
RX bytes:43185 (42.1 Kb) TX bytes:14875
(14.5 Kb)
Interrupt:9 Base address:0x5e00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:82 errors:0 dropped:0 overruns:0
frame:0
TX packets:82 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:5895 (5.7 Kb) TX bytes:5895 (5.7
Kb)
[root@prabuhomepc prabu]# drak
drakautoinst drakconnect drakgw
draksplash
drakbackup drakcronat drakonline
drakTermServ
drakboot drakfirewall drakperm
drakupdate_fstab
drakbug drakfloppy drakproxy
drakxconf
drakbug_report drakfont draksec
drakxservices
drakconf drakfw draksound
drakxtv
[root@prabuhomepc prabu]# drakgw
Could not find configuration. Please reconfigure. at
/usr/sbin/drakgw line 164.
[root@prabuhomepc prabu]# urpmi draknet
no package named draknet
[root@prabuhomepc prabu]#
If you keep on repeating the same steps, i'm not sure
where this is going to lead us. The result of your
step 5 is the same as the previous one that i sent
you. I've given my IP above. If you want i can give
you useraccount with root access for you to
troubleshoot. But pls. fix this bug before releasing
mandrake9.0.
Until then i'm temporarlily going back to 8.2 for my
friend to use the other computer simultaneously.
Still waiting for a solution,
Prabu
--- Florin <[EMAIL PROTECTED]> wrote:
> Hello,
>
> this is the standard porecedure:
>
> 1. configure your internet connection with draknet
> 2. configure your internet access with draknet
> 3. configure your security or internet sharing
> 4. try if it works
> 5. grep -v ^#
> /etc/shorewall/{zones,interfaces,policy,masq,rules}
> |grep -v
> ^$
>
> and send us the output
>
> 6. with the sharing connection enabled, can you ping
> a real web IP address ?
> In that case the you have name resolution problem.
>
> 7. server named status on firewall
> 8. cat /erc/resolv.conf on the client side
> 9. route -n on the client side
> cheers,
>
=====
check out www.Openoffice.org. It is better to avoid using pirated software.
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
