Florin,
More serious problem. From my ifconfig you'ld have
seen two ethernet cards. When i choose to reconfigure
instead of enable in drakgw, it is telling me only
eth1 is present.
If i proceeded further, it gave me the message that
error in eth0. pls. see below the deatils. still
sharing doesn't work.
[root@prabuhomepc prabu]# drakgw
Error: Duplicate Interface eth0
/sbin/service: line 148: 2979 Terminated
$debug $servicedir/$service $options
Stopping CUPS printing system:
[ OK ]
Stopping named:
[ OK ]
Error: Duplicate Interface eth0
Error: Duplicate Interface eth0
[root@prabuhomepc prabu]# ifconfig
eth0 Link encap:Ethernet HWaddr
00:04:76:D4:FB:4D
inet addr:202.156.164.199
Bcast:255.255.255.255 Mask:255.255.240.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST
MTU:1500 Metric:1
RX packets:1501 errors:0 dropped:0
overruns:0 frame:0
TX packets:1194 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:663799 (648.2 Kb) TX bytes:172820
(168.7 Kb)
Interrupt:5 Base address:0xd000
eth1 Link encap:Ethernet HWaddr
00:E0:29:3C:38:44
inet addr:192.168.0.1 Bcast:192.168.0.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:18 errors:0 dropped:0 overruns:0
frame:0
TX packets:22 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:100
RX bytes:6692 (6.5 Kb) TX bytes:1602 (1.5
Kb)
Interrupt:9 Base address:0x5e00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0
frame:0
TX packets:12 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:1134 (1.1 Kb) TX bytes:1134 (1.1
Kb)
--- prabu anand <[EMAIL PROTECTED]> wrote:
> Dear Florin,
>
> I installed all the packages. Some conflicts
> reported
> from draksec package for the file,
> /usr/sbin/draksec,
> when installing drakx-newt package.
>
> I forced the installation and everything installed.
>
> Pls. see the results below.
>
>
> Here are the results. I'm getting the same error
> message.
> [root@prabuhomepc prabu]# drakconnect
> modprobe: Can't locate module serial
> modprobe: Can't locate module serial
> Please wait while probing serial ports...
> Shutting down interface eth0:
>
> [ OK ]
> Shutting down interface eth1:
>
> [ OK ]
> Shutting down loopback interface:
>
> [ OK ]
> Setting network parameters:
>
> [ OK ]
> Bringing up loopback interface:
>
> [ OK ]
> Enabling IPv4 packet forwarding
>
> [ OK ]
> Bringing up interface eth0:
>
> [ OK ]
> Bringing up interface eth1:
>
> [ OK ]
> [root@prabuhomepc prabu]# ping yahoo.com
> PING yahoo.com (64.58.79.230) from 202.156.164.199 :
> 56(84) bytes of data.
> 64 bytes from w1.rc.vip.dcx.yahoo.com
> (64.58.79.230):
> icmp_seq=1 ttl=234 time=294 ms
>
> --- yahoo.com ping statistics ---
> 2 packets transmitted, 1 received, 50% loss, time
> 1016ms
> rtt min/avg/max/mdev = 294.433/294.433/294.433/0.000
> ms
> [root@prabuhomepc prabu]# drakgw
> Could not find configuration. Please reconfigure. at
> /usr/sbin/drakgw line 160.
> [root@prabuhomepc prabu]# rpm -qf /usr/sbin/drakgw
> drakxtools-newt-1.1.9-45mdk
> [root@prabuhomepc prabu]#
>
>
>
> --- Florin <[EMAIL PROTECTED]> wrote:
> >
> > try the packages at:
> >
> >
>
http://people.mandrakesoft.com/~florin/www/rpms/drakgw
> >
> > they will soon be present on cooker, thx to
> > guillaume.
> >
> > cheers,
> > --
> > Florin http://www.mandrakesoft.com
> > http://people.mandrakesoft.com/~florin/
> >
>
>
> =====
> check out www.Openoffice.org. It is better to avoid
> using pirated software.
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Finance - Get real-time stock quotes
> http://finance.yahoo.com
>
=====
check out www.Openoffice.org. It is better to avoid using pirated software.
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
