https://qa.mandrakesoft.com/show_bug.cgi?id=892
------- Additional Comments From [EMAIL PROTECTED] 2003-01-20 00:29 -------
OK, I downloaded the latest initscripts from Cooker, but it is still a "nogo".
This is how the syslog looks now at boot:
Jan 19 23:04:12 thinkpad kernel: PCI: Enabling device 00:03.0 (0000 -> 0003)
Jan 19 23:04:12 thinkpad kernel: 3c59x: Donald Becker and others.
www.scyld.com/network/vortex.html
Jan 19 23:04:12 thinkpad kernel: 00:03.0: 3Com PCI 3c556B Laptop Hurricane at
0x1800. Vers LK1.1.16
Jan 19 23:04:12 thinkpad kernel: PCI: Setting latency timer of device 00:03.0 to 64
Jan 19 23:04:12 thinkpad kernel: eth0: command 0x5800 did not complete!
Status=0xffff
Jan 19 23:04:12 thinkpad kernel: eth0: command 0x2804 did not complete!
Status=0xffff
I can't understand why the HWaddr looks so funny. See the ifconfig printout:
eth0 Link encap:Ethernet HWaddr FF:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:9 Base address:0x1400
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
description:
It seems to be autodetected fine, but does not function with either Static IP
addressed or DHCP.
With Mandrake 9.0 it works fine.
This is an extract from the syslog:
Jan 18 14:32:30 thinkpad ifplugd[4926]: Using interface eth0/FF:FF:FF:FF:FF:FF
with driver 3c59x LK1.1.16
Jan 18 14:32:30 thinkpad ifplugd[4926]: ETHTOOL_GLINK failed: Operation not
supported
Jan 18 14:32:30 thinkpad ifplugd[4926]: ifplugd 0.12 successfully initialized,
link beat not detected.
jan 19 13:28:42 localhost ifup: failed; no link present. Check cable?
/Kenneth
