https://qa.mandrakesoft.com/show_bug.cgi?id=892
------- Additional Comments From [EMAIL PROTECTED] 2003-02-01 19:00 ------- Viestiss� Lauantai 1. Helmikuuta 2003 19:22, [Bug 892] kirjoitti: Try to boot with pci=noacpi ------- Additional Comments From [EMAIL PROTECTED] 2003-02-02 21:42 ------- I have the same problem and I have 2 PCI 3Com adapters which worked fine in Mandrake 9.0. One card is 10 Mbit the other one 100Mbit the 10Mbit is one that tries to use dhcp. when i do ifconfig no ip address is gotten for both cards (eth0 and eth1). Both use the same 3c59x driver. The 100 Mbit has a fixed address and even that one has no ip address assigned. reconfiguring does not help (also the same with linuxconf). Even if I do ifdown eth0 and ifup eth0, I get an error that the cable is not connected, which is not true. Booting with an older version (9.0) seems to work fine there. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] description: It seems to be autodetected fine, but does not function with either Static IP addressed or DHCP. With Mandrake 9.0 it works fine. This is an extract from the syslog: Jan 18 14:32:30 thinkpad ifplugd[4926]: Using interface eth0/FF:FF:FF:FF:FF:FF with driver 3c59x LK1.1.16 Jan 18 14:32:30 thinkpad ifplugd[4926]: ETHTOOL_GLINK failed: Operation not supported Jan 18 14:32:30 thinkpad ifplugd[4926]: ifplugd 0.12 successfully initialized, link beat not detected. jan 19 13:28:42 localhost ifup: failed; no link present. Check cable? /Kenneth
