Quoting ron minnich <[EMAIL PROTECTED]>: > On Jan 13, 2008 2:32 PM, Florentin Demetrescu <[EMAIL PROTECTED]> wrote: > > > 5) after booting with LB, and forcing the following registers of the lpc > bridge > > with the following comands: > > setpci -s 00:01.0 a0.l=c1100001 > > setpci -s 00:01.0 a4.l=0 > > setpci -s 00:01.0 a8.l=0 > > setpci -s 00:01.0 ac.l=0 > > setpci -s 00:01.0 b0.l=02f40295 > > setpci -s 00:01.0 b4.l=085f0800 > > (force them at same values as in proprietary bios) > > the command "flashrom -m gigabyte:m57sli" do not hang anymore and correctly > > identifies the flash chip (I haven't tested yet a full flash programming) > > Do you think these values would be the same for all mainboards using > this part? That answer will determine how we incorporate this fix. >
No. On my main computer which uses a mcp55 SB too, these values are definately not the same.. These are board specific values and, as Yinghai suggests in a later post, they should be fixed in the m57sli specific files (on the other hand I agree with Torsten that there are no differences btw the v1.0 & v2.0 versions of the boards regarding these values) -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
