Hello,
I propose this patch :
Index: LinuxBIOSv2_spi_debug/src/southbridge/nvidia/mcp55/mcp55_lpc.c
===================================================================
--- LinuxBIOSv2_spi_debug/src/southbridge/nvidia/mcp55/mcp55_lpc.c
(revision
3050)
+++ LinuxBIOSv2_spi_debug/src/southbridge/nvidia/mcp55/mcp55_lpc.c (working
copy)
@@ -161,11 +161,15 @@
static void lpc_init(device_t dev)
{
+ struct southbridge_nvidia_mcp55_config *conf;
+ uint32_t dword;
uint8_t byte;
uint8_t byte_old;
int on;
int nmi_option;
+ conf = dev->chip_info;
+
lpc_common_init(dev);
#if 0
@@ -238,6 +242,18 @@
/* Initialize the High Precision Event Timers */
// enable_hpet(dev);
+ /* Enables the decoding of the IO addresses to the flash SPI interface
+ (if present into the SIO) */
+ if (conf->spi_sio_enable) {
+ dword = pci_read_config32(dev, 0xa0);
+ dword |= (1<<30);
+ pci_write_config32(dev, 0xa0, dword);
+
+ /* FIXME : really dirty! It seems that the IO addr range for
the SPI IF.
+ HAS to be set into the 0xb0 or 0xb4 reg which conflicts
strongly with
+ mcp55_lpc_enable_childrens_resources() */
+ pci_write_config32(dev, conf->spi_sio_pcireg,
conf->spi_sio_iorange);
+ }
}
static void mcp55_lpc_read_resources(device_t dev)
Index: LinuxBIOSv2_spi_debug/src/southbridge/nvidia/mcp55/chip.h
===================================================================
--- LinuxBIOSv2_spi_debug/src/southbridge/nvidia/mcp55/chip.h (revision 3050)
+++ LinuxBIOSv2_spi_debug/src/southbridge/nvidia/mcp55/chip.h (working copy)
@@ -28,8 +28,11 @@
unsigned int ide1_enable : 1;
unsigned int sata0_enable : 1;
unsigned int sata1_enable : 1;
+ unsigned int spi_sio_enable : 1;
unsigned int mac_eeprom_smbus;
unsigned int mac_eeprom_addr;
+ unsigned int spi_sio_pcireg;
+ unsigned int spi_sio_iorange;
};
struct chip_operations;
extern struct chip_operations southbridge_nvidia_mcp55_ops;
Index: LinuxBIOSv2_spi_debug/src/mainboard/gigabyte/m57sli/Config.lb
===================================================================
--- LinuxBIOSv2_spi_debug/src/mainboard/gigabyte/m57sli/Config.lb
(revision
3050)
+++ LinuxBIOSv2_spi_debug/src/mainboard/gigabyte/m57sli/Config.lb
(working copy)
@@ -403,6 +403,9 @@
register "sata1_enable" = "1"
register "mac_eeprom_smbus" = "3" # 1:
smbus under 2e.8, 2: SM0 3: SM1
register "mac_eeprom_addr" = "0x51"
+ register "spi_sio_enable" = "1"
+ register "spi_sio_pcireg" = "0xb0"
+ register "spi_sio_iorange" =
"0x085f0800"
end
end # device pci 18.0
device pci 18.0 on end # Link 1
Btw is this related to the issue #87 in Issuetracker? (should a new ticket be
created especially for this issue?)
Thanks a lot for the help in resolving this issue to all the coreboot team!
Florentin
--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
