On Thu, Oct 9, 2008 at 1:58 PM, Myles Watson <[EMAIL PROTECTED]> wrote:
> Here are the major differences between v2 and v3 initializing serengeti
> cheetah. The biggest problem is that the memory-mapped I/O ends up in the
> wrong place (see the Display controller's ROM address)
This one is easy:
if ((dev->on_mainboard) && (dev->rom_address == 0)) {
// Skip it if rom_address is not set in MB Config.lb.
// TODO: No more Config.lb in coreboot-v3.
return;
}
we have not done it yet.
If anybody wants to get to this before I do, the help is appreciated.
I think it needs a dtc fix.
i.e. in a dts for a part,
rom_address = "fff00000";
and the dtc needs to know this is one of the special properties in the
device struct.
ron
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
