On 24.10.2008 17:13, Carl-Daniel Hailfinger wrote: > Hi, > > I'm getting the following message from lspci on my K8 machine: > > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: [80] HyperTransport: Host or Secondary Interface > !!! Possibly incomplete decoding for revision 1.02 > Command: WarmRst+ DblEnd- > Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- > <CRCErr=0 > Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit > Revision ID: 1.02 > Kernel modules: ipmi_si > > Note the warning about "Possibly incomplete decoding" which stems from > the fact that the processor mentions HT revision 1.02 which is the last > non-public revision. Every revision from 1.03 and beyond seems to be > publically available. Now the big question is: Can we decode HT 1.02 > like HT 1.03 or have there been fundamental changes in between? I'd like > to create a patch for PCIutils (lspci) so we can have full info without > a warning message. >
I forgot to specify the processor: /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 44 model name : AMD Sempron(tm) Processor 3000+ stepping : 2 cpu MHz : 1800.000 cache size : 128 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm bogomips : 3620.86 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc Regards, Carl-Daniel -- http://www.hailfinger.org/ -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
