Hi Marc, On 03.11.2008 22:21, Marc Jones wrote: > Carl-Daniel Hailfinger wrote: >> Hi Marc, >> >> maybe you can shed some light on the problem below. >> >> Basically, the K8 reports in lspci that it supports HT 1.02, but the >> BKDG says it uses HT 1.03. And HT 1.03 is the first publicly >> available spec. > > I am not sure why you are blowing this out of proportion.
I'm very sorry if my questions gave that impression. > It is a warning. It isn't a problem. If you examine the freely > available K8 BKDG, you will find that registers in the K8 match the > 1.03 revision of the spec. Thanks for confirming this. > Thus, the settings read by lspci are decoded correctly. Actually, the settings decoded by lspci are incomplete because of the version mismatch. I'll send a patch to lspci maintainers with a workaround. Regards, Carl-Daniel -- http://www.hailfinger.org/ -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
