On T, 2009-01-27 at 20:02 -0500, Kevin O'Connor wrote: > > The log output at default loglevel of 1 is attached. At higher log > > levels the last dump seems to come from a different place. Should I > > gather such logs with a larger loglevel or does this say something > > revealing already? Anything else I can provide here? > > Those messages aren't reporting a problem - I see them on my epia-cn > and on qemu. You'll need to increase the debugging level to see if > something else is seen before a failure.
The output at loglevel 20 is very noisy, it will be probably too high for attachment even. The end few kilobytes of output should be as good probably? I can put it on some webspace though if there's a chance the non-tail parts of it could help. > BTW, does the DBE63 implement all the legacy hardware (like ioport > access to timers, cmos, etc.)? I need to research into that... Are these things coreboot would be supporting, or the hardware design itself? Off-hand I just know that there is a cmos layout file in the port. Thanks, Mart Raudsepp -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
