So I ran built and then ran the program on a running node. I got the following output. Current jumper state: Low. -- 2 to 3 I then ran flashrom with no change.
Joshua McDowell - Lead integrator Sent from my Blackberry -----Original Message----- From: Myles Watson <[email protected]> Date: Thu, 21 May 2009 10:45:45 To: ron minnich<[email protected]> Cc: Joshua McDowell<[email protected]>; Carl-Daniel Hailfinger<[email protected]>; <[email protected]> Subject: Re: [coreboot] jarrell_rom_jumper.c ( I think I found it ) On Thu, May 21, 2009 at 9:44 AM, ron minnich <[email protected]> wrote: > I think this file is the key to writing the flash. This is how we used > to do write enables before mainboard support went into flashrom. So the next thing for Joshua to do is compile this file and run it before running flashrom again, right? Thanks, Myles -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
