Also, the factory flash docs never mention changing a jumper..
Joshua McDowell - Lead integrator Sent from my Blackberry -----Original Message----- From: Peter Stuge <[email protected]> Date: Thu, 21 May 2009 20:41:24 To: <[email protected]> Subject: Re: [coreboot] jarrell_rom_jumper.c ( I think I found it ) Joshua McDowell wrote: > Forcing the use of "SST49LF160C" as the prom dumps the bios > perfectly every time, even before the use of the newly discovered > source code. Unfortunately that doesn't mean very much. A forced read disregards everything needed for writing or erasing a chip and only tries desperately to read the contents. It's only some minimal functionality that doesn't help us for write or erase. Maybe you can try playing with the rom_jumper source a bit. Try to get it where it says that the jumper value is 1-2 instead? Maybe there is even a hardware jumper on the board? Can you check? //Peter -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
