On Thu, 21 May 2009 20:41:24 +0200, Peter Stuge <[email protected]> wrote:
> Joshua McDowell wrote:
>> Forcing the use of "SST49LF160C" as the prom dumps the bios
>> perfectly every time, even before the use of the newly discovered
>> source code.
>
> Unfortunately that doesn't mean very much.
>
> A forced read disregards everything needed for writing or erasing a
> chip and only tries desperately to read the contents. It's only some
> minimal functionality that doesn't help us for write or erase.
>
> Maybe you can try playing with the rom_jumper source a bit. Try to
> get it where it says that the jumper value is 1-2 instead?
>
> Maybe there is even a hardware jumper on the board? Can you check?
>
>
Sounds like you may have to get out the meter and do some physical
tracing...
--
Thanks,
Joseph Smith
Set-Top-Linux
www.settoplinux.org
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
