I was using the pre-built one mentioned in the wiki:
http://www.coreboot.org/SeaBIOS . I don't know what the debug option is
set to. This worked for me for the tyan s2881, so I assume that the
correct options are set. I tried compiling my own and I had that option
set along with the others mentioned in the wiki, but I also had the same
problem. I can try compiling my own again and making sure the debug
option is set to 6.
--
Hugh Greenberg
Myles Watson wrote:
On Thu, Oct 29, 2009 at 12:21 PM, Hugh Greenberg <[email protected]
<mailto:[email protected]>> wrote:
The script didn't help. Seabios just doesn't see the rom. Is
this a seabios problem? I didn't have this problem for the tyan
s2881. Here is the output again:
Found mainboard Arima HDAMA
Found CBFS header at 0xfffeffe0
Ram Size=0x80000000
Found 2 cpu(s)
Scan for VGA option rom
Here's a snippet from mine:
Scan for VGA option rom
Attempting to init PCI bdf 02:00.0 (dev/ven 014110de)
Searching CBFS for prefix pci10de,0141.rom
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
...
Much later
...
Scan for option roms
Attempting to init PCI bdf 00:00.0 (dev/ven 005e10de)
Searching CBFS for prefix pci10de,005e.rom
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Attempting to map option rom on dev 00:00.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:01.0 (dev/ven 005110de)
Searching CBFS for prefix pci10de,0051.rom
Found CBFS file fallback/coreboot_ram
Found CBFS file fallback/payload
Found CBFS file
Is your debug level >= 6 for SeaBIOS? It looks like you do.
Do you have CONFIG_OPTION_ROMS_DEPLOYED set to 0?
Thanks,
Myles
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
