I haven't tried with a unpatched version of memtest86+ 4.0 and it works with vendor BIOS. Now with the patched version it halts with coreboot without error messages (the output you see below is what I see until I press reset button) and with vendor BIOS its reboots at the same point (after 2 sec).
bye and thx, Knut Kujat. Stefan Reinauer escribió: > Knut, > > are the values the same as with the vendor bios? Do you get any errors > at all, or does it just hang? > > Stefan > > On 1/26/10 5:48 PM, Knut Kujat wrote: > >> I tried it with and without the little patch below ( and of course with >> the "big" patch) and it freezes after 2 seconds: >> >> Memtest86+ v4.00 | Pass 0% >> AMD K10 (65nm) @ 2000 MHz | Test 3% # >> L1 Cache: 64K 30303 MB/s | Test #0 [Address test, walking ones] >> L2 Cache: 512K 10050 MB/s | Testing: 4096M - 6144M 16G >> L3 Cache: 2048K 5649 MB/s | Pattern: 00000000 >> Memory : 16G 1122 MB/s >> |------------------------------------------------- >> Chipset : AMD K10 IMC (ECC : Detect / Correct - Chipkill : Off) >> Settings: RAM : 333 MHz (DDR667) / CAS : 5-5-5-15 / DDR2 (64 bits) >> >> WallTime Cached RsvdMem MemMap Cache ECC Test Pass Errors >> ECC Errs >> --------- ------ ------- -------- ----- --- ---- ---- ------ >> -------- >> 0:00:02 16G 0K coreboot on >> off Std 0 0 >> >> ----------------------------------------------------------------------------- >> >> If you need some more output of whatever just ask me. >> >> bye and thx, >> Knut Kujat >> >> > > > -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
