On 1/27/10 10:35 AM, Knut Kujat wrote: > Knut Kujat escribió: > >> I haven't tried with a unpatched version of memtest86+ 4.0 and it works >> >> > typo!! I meant I HAVE tried memtest86+ 4.0 with a non patched version > and vendor BIOS and it worked. > > Are you saying that the patch breaks Vendor BIOS, too?
Stefan >> with vendor BIOS. Now with the patched version it halts with coreboot >> without error messages (the output you see below is what I see until I >> press reset button) and with vendor BIOS its reboots at the same point >> (after 2 sec). >> >> bye and thx, >> Knut Kujat. >> >> Stefan Reinauer escribió: >> >> >>> Knut, >>> >>> are the values the same as with the vendor bios? Do you get any errors >>> at all, or does it just hang? >>> >>> Stefan >>> >>> On 1/26/10 5:48 PM, Knut Kujat wrote: >>> >>> >>> >>>> I tried it with and without the little patch below ( and of course with >>>> the "big" patch) and it freezes after 2 seconds: >>>> >>>> Memtest86+ v4.00 | Pass 0% >>>> AMD K10 (65nm) @ 2000 MHz | Test 3% # >>>> L1 Cache: 64K 30303 MB/s | Test #0 [Address test, walking ones] >>>> L2 Cache: 512K 10050 MB/s | Testing: 4096M - 6144M 16G >>>> L3 Cache: 2048K 5649 MB/s | Pattern: 00000000 >>>> Memory : 16G 1122 MB/s >>>> |------------------------------------------------- >>>> Chipset : AMD K10 IMC (ECC : Detect / Correct - Chipkill : Off) >>>> Settings: RAM : 333 MHz (DDR667) / CAS : 5-5-5-15 / DDR2 (64 bits) >>>> >>>> WallTime Cached RsvdMem MemMap Cache ECC Test Pass Errors >>>> ECC Errs >>>> --------- ------ ------- -------- ----- --- ---- ---- ------ >>>> -------- >>>> 0:00:02 16G 0K coreboot on >>>> off Std 0 0 >>>> >>>> ----------------------------------------------------------------------------- >>>> >>>> If you need some more output of whatever just ask me. >>>> >>>> bye and thx, >>>> Knut Kujat >>>> >>>> >>>> >>>> >>> >>> >>> >> >> >> > > -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
