Knut Kujat escribió: > I haven't tried with a unpatched version of memtest86+ 4.0 and it works > typo!! I meant I HAVE tried memtest86+ 4.0 with a non patched version and vendor BIOS and it worked.
> with vendor BIOS. Now with the patched version it halts with coreboot > without error messages (the output you see below is what I see until I > press reset button) and with vendor BIOS its reboots at the same point > (after 2 sec). > > bye and thx, > Knut Kujat. > > Stefan Reinauer escribió: > >> Knut, >> >> are the values the same as with the vendor bios? Do you get any errors >> at all, or does it just hang? >> >> Stefan >> >> On 1/26/10 5:48 PM, Knut Kujat wrote: >> >> >>> I tried it with and without the little patch below ( and of course with >>> the "big" patch) and it freezes after 2 seconds: >>> >>> Memtest86+ v4.00 | Pass 0% >>> AMD K10 (65nm) @ 2000 MHz | Test 3% # >>> L1 Cache: 64K 30303 MB/s | Test #0 [Address test, walking ones] >>> L2 Cache: 512K 10050 MB/s | Testing: 4096M - 6144M 16G >>> L3 Cache: 2048K 5649 MB/s | Pattern: 00000000 >>> Memory : 16G 1122 MB/s >>> |------------------------------------------------- >>> Chipset : AMD K10 IMC (ECC : Detect / Correct - Chipkill : Off) >>> Settings: RAM : 333 MHz (DDR667) / CAS : 5-5-5-15 / DDR2 (64 bits) >>> >>> WallTime Cached RsvdMem MemMap Cache ECC Test Pass Errors >>> ECC Errs >>> --------- ------ ------- -------- ----- --- ---- ---- ------ >>> -------- >>> 0:00:02 16G 0K coreboot on >>> off Std 0 0 >>> >>> ----------------------------------------------------------------------------- >>> >>> If you need some more output of whatever just ask me. >>> >>> bye and thx, >>> Knut Kujat >>> >>> >>> >> >> > > > -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
